2023 Big Bend 6'8"X24' Gooseneck Livestock Trailer

BUCKSKIN TAN

Lengths from 16' - 40' and widths from 5' - 8'. Axles come in single, double or triple. We can also build a 6' wide trailer on 5' wide axles, a 6'8" wide trailer on a 6' wide axles and a 7' wide trailer on 6'8" wide axles (all of these will have a fender on the inside of the trailer).
Available in full top, half top, or bow top
All trailers less than 28' long will come with a receiver hitch on the back of your trailer so you can pull another trailer or chute behind you.
Unique design for uncoupling of trailer latch from outside truck bed (no more climbing over & around the truck bed to unhook)
3' access gate on front passenger side of trailer
2 small swinging calf gates in the nose that can be locked
All center gates come with a sorting gate; center gates are supported when open or shut (not just bouncing up & down as you go over rough roads)
Rear butterfly gates can be slammed shut so heavy spring loaded pins on bottom of gate latch automatically into trailer frame (keeps you from getting the gates kicked back in your face). Rear gates can also be latched open to drag a critter into the trailer
On our 1/2 & 3/4 top trailers, the top rail has four lazy L's welded so a rope can be flipped over it to drag cattle into back of trailer
Exclusive non-rusting gap design on bottom for easy clean out
Wind resistant aerodynamic nose design makes trailer pull like it's not there
Bottom frame of trailer is built with 2 X 4 rectangle tubing and is much stronger than the normal gooseneck that uses angle-iron
Sides are built with solid steel and rectangle tubing so there are no places for water and manure to accumulate and rust out
Runners under floor are 2.5" X 2.5" square tubing welded solidly into the frame, no angle iron is used in the frame
7000 lb EZ lube rubber torsion axles
16" 10 ply (14 ply available) steel radial tires (load range E) with heavy duty 8 hole steel rims & lockable nose mounted spare
No exposed wires for brush country
All new orders come with LED lights and powder coated paint
Front bottom and front of brush fender is Rhino lined to prevent rocks from chipping paint